First, make sure your water filter is up to date to help avoid clogs that reduce water flow. Next, double check that the fridge water line behind the refrigerator isn’t kinked or twisted. Lastly, use a leveler to ensure that your refrigerator and ice maker are level so water distributes evenly throughout the ice tray.
With the ice making compartment door open, touch to select the blinking With the ice making compartment door open, touch for 3 seconds until 2 short beeps sound. Page 15 Opening and closing dampers (1) Touch to select the damper to be set. Each touch of changes the damper type along with a short beep. Problem: Individual Issues: Quick Fix: 1. Ice Maker Problems: Ice maker won’t work: Turn on the ice maker if it’s on, check the freezer setting (should be 0-5 0 F) and water supply, level the refrigerator, and replace a defective filter, water inlet valve, dispenser control board, ice maker assembly, or main control board. 1. Disconnect – The first step in the process is to disconnect the refrigerator from the power. You can either unplug it from the wall or you can turn off the circuit breaker. 2. Wait – You should wait at least five minutes before you reestablish power to the unit again.Here’s how to reset Whirlpool ice maker and remove jammed ice: Unplug the refrigerator. Open the refrigerator door with the ice dispenser. Locate the chute where the ice drops down. Slide a long wooden spoon into the jammed ice in the chute to break up clumps and remove the blockage. Close door and plug in refrigerator.. 277 334 303 265 142 45 472 488